LSIS XGL-EFMTB - Basic Settings; PLC Type Setting

Chapter 5 XG5000 Program
5-2
5.2 Basic Settings
5.2.1 PLC type setting
To connect XG5000 to PLC, it is necessary to set PLC type. To create new project, click [File]  [New
File] in XG5000 Menu. At new project menu, set the project name, project type and PLC type.
[Fig 5.2.1] is initial screen of XG5000
[Fig 5.2.1] Start Page of XG5000
[Fig. 5.2.2] Create new project