Chapter 5 XG5000 Program
5-8
5.2.3 Standard settings (Module)
Standard settings is to specify communication system parameters necessary to control and
manage the Ethernet network, which will decide basic items such as FEnet I/F module’s IP
address, subnet mask, gateway address, DNS server, reception latency time, number of
dedicated connections, host table setting, etc.
Thus, surely set basic parameters on the standard settings screen of the module window so to
download for the Ethernet communication. Standard settings are classified into for XGI/XGK and
for XGR.
(1) In case CPU is XGK/XGI series
[Fig. 5.2.12] shows specified standard parameters in case CPU is XGI/XGK
[Fig. 5.2.12] Standard settings (details) in case of XGK/XGI
Details on the screen displayed in [Fig. 5.2.12] are as follows;
Among those details below, IP address, High-speed link station No. and media shall be reset
appropriately for the application environment.
To Next Page
Loading...