LSIS XGL-EFMTB - System Diagnosis; Execution of the Diagnosis Function

Chapter 5 XG5000 Program
5-28
5.6 System Diagnosis
System Diagnosis function is used to display general service status and information of the
communication module in Online status including link type, link information and OS version so to allow
the user to precisely diagnose and debug the data Tx/Rx relation of the communication module
presently used.
5.6.1 Execution of the diagnosis function
Run XG5000 to connect with and then select [Online] -> [Communication module setting] ->
[System Diagnosis] to display [Fig. 5.6. 2], which shows base and slot information the present
module is installed on and the operation status.
[Fig. 5.6.1] Selection of system diagnosis function