Chapter 1. Introduction
1-1
Chapter 1 Introduction
1.1 Guide to Use This Manual
This manual includes specifications, functions and handling instructions for the XGB series PLC.
This manual is divided up into chapters as follows.
No. Title Contents
Chapter 1 Introduction
Describes configuration of this manual, unit’s features and
terminology.
Chapter 2 System Configurations
Describes available units and system configuration in the XGB
series.
Chapter 3 General Specifications
Describes general specifications of units used in the XGB
series.
Chapter 4 CPU Specifications
Describes performances, specifications and operations.
Chapter 5
Program
Configuration and
Operation Method
Chapter 6 CPU Module Functions
Chapter 7 Input/Output Specifications Describes operation of basic and input/output.
Chapter 8
Built-in High-speed Counter
Describes built-in high-speed counter functions.
Chapter 9 Installation and Wiring
Describes installation, wiring and handling instructions for
reliability of the PLC system.
Chapter 10
Maintenance
Describes the check items and method for long-
term normal
operation of the PLC system.
Chapter 11
Troubleshooting Describes various operation errors and corrective actions.
Appendix 1 Flag List Describes the types and contents of various flags.
Appendix 2 Dimension Shows dimensions of the main units and expansion modules.
Appendix 3
Describes the compatibility with GLOFA.
Appendix 4 Instruction List Describes the special relay and instruction list.
To Next Page
Loading...
Need help?
General
