LSIS Master-K K1000S - K200 S; How to Use the Memory Module; Write a Program into Memory Module

Chapter 6 Memory module MASTER-K
6-2
6.2.2 K200S
The K200S series includes a flash memory, and the operation mode (RAM mode / Flash
memory mode) can be selected by setting DIP switch on the front of CPU module.
DIP switch setting Description
1: Off, 2: Off
When the CPU starts with RUN mode, the CPU module
operates with the program stored in RAM. (the contents
of flash memory is ignored.)
1: Off, 2: On
When the CPU starts with RUN mode, the CPU module
operates with the program stored in flash memory.
6.3 How to use the memory module
6.3.1 Write a program into memory module
When insert memory module into the memory connector of CPU module, make sure the
power of CPU is turned off. To write a program on memory module, the CPU should be
on STOP mode.
1) Download a program to be written on a memory module. (Use KGL-WIN or KLD-
150S)
2) Switch the CPU to the STOP mode and turn off power.
3) Insert a memory module into the memory module connector of CPU module.
4) Turn on the power
5) Execute flash memory write function with KGL-WIN or KLD-150S.
Remark
1. Refer the user’s manual of KGL-WIN or KLD-150S for details.
2. In case of K200S, switch the CPU to STOP mode and select flash memory write function of
KGL-WIN or KLD-150S.
2
1
ON
2
1
ON
ROM MODE
TEST MODE
ROM MODE
TEST MODE