LSIS Master-K K1000S - Specifications; K200 S Series

Chapter 8 Power supply modules MASTER-K
8-4
8.2 Specifications
8.2.1 K200S series
Item GM6-PAFA GM6-PAFB GM6-PAFC GM6-PDFA GM6-PDFB
Rated
voltage
100 ~ 240 VAC 12 ~ 24 VDC
Rated
frequency
50 ~ 60 Hz -
Rated
current
0.7 / 0.35 A (110 / 220 VAC) 0.8 / 0.4 A 1.5 / 0.7 A (12 / 24 VDC)
Inrush
current
Max. 30 A Max. 50 A Max. 40 A
Efficiency 65% or more (with rated load) 65% or more (with rated load)
Fuse 3A/250VAC (slow blown type) 5A/250VAC -
Input
Dropout
tolerance
20msec or less 1msec or less
Output
voltage
5VDC / 24VDC
5VDC / ±15VDC
5VDC / 24VDC 5VDC
5VDC / ±15VDC
Output
current
5VDC : 2A
24VDC : 0.3A
5VDC : 2A
+15VDC : 0.5A
-15VDC : 0.2A
5VDC : 3.5A
24VDC : 0.3A
5VDC : 2A
5VDC : 3A
+15VDC : 0.5A
-15VDC : 0.2A
Output
Over
current
protection
5VDC : 2.2A
24VDC : 0.33A
5VDC : 2.2A
+15VDC : 0.55A
-15VDC : 0.22A
5VDC : 4.0A
24VDC : 0.33A
5VDC : 2.2A
5VDC : 3.3A
+15VDC : 0.55A
-15VDC : 0.22A
Indicator LED (Turns on when output voltage is normal)
Wire specification 0.75 ~ 2mm
2
Weight1 320 g 400 g 400 g
Caution
When a K200S system includes an A/D or D/A module, GM6-PAFB or GM6-PDFB module
should be chosen for the power supply. Otherwise, A/D or D/A module can not operate due to
lack of ±15VDC power supply.