Chapter 1 Instruction MASTER-K
1-1
1 Introduction
1.1 Guide to the user’s manual
This user’s manual contains specifications, performance, and handling instructions for each of
unit of MASTER-K 200S/300S/1000S series PLC system.
The following table shows the configuration of this user’s manual.
Chapter Item Description
1 Instruction
Describes configuration of this manual, modules
features and terminology.
2 System configuration
Describes available modules and system
configurations in the MASTER-K200S/300S/1000S
series.
3 Specifications
Describes general specifications of various modules
used in the MASTER-K200S/300S/1000S series.
4 CPU module
Describes the performance, specifications and
functions of the CPU module.
5 Battery
6 Memory module
7 Digital I/O module
8 Power supply module
9 Base and cable
Describes the specifications and handling instructions
for other modules except for the CPU module.
10 Installation and wiring
Describes installation, wiring and handling instructions
for reliability of the PLC system.
11 Maintenance
Describes the check point and method for
maintenance of the PLC system.
12 Troubleshooting
Describes various operation errors and corrective
actions.
13
RS232C communication
for K200S
Describes the RS-232C communication function of
K200S A and C type
14
RS422 communication
for K200S
Describes the RS422 communication functions of
K200S B type
15 PID function of K200S
Describes the PID control function of K200S B and C
type
16
High speed counter of
K200S
Describes the HSC function of K200S C type
Appendix 1 Flag list Describes types and contents of various flags
Appendix 2 Dimension
Shows dimensions of CPU, I/O modules and base
unit
Remark
In this manual, it is not described that the hardware information and programming of
special/communication modules. Please refer the user’s manual of each module for details.
To Next Page
Loading...
