S100 PROFInet Option Manual
2 Part Names and Installation
2.1 Exterior
2.2 Installation
Warning) Connect a communication network after the power supply is off. If PROFInet
communication module is removed or installed, the power supply should be switched
off. Otherwise, the S100 inverter will be damaged entirely.
Take off PROFInet communication module from the product after the power supply is
totally discharged.
Unfasten the front cover fixing bolt
to remove the front cover and remove
I/O cover((1), (2)) from
a dedicated S100 inverter
for communication.
To Next Page
Loading...
