LSIS S100 Option Manual

S100 PROFInet Option Manual
14
6 PROFIdrive Status Diagram
The following diagram shows the operation status that the PROFInet communication
module uses.
Status
Description
S1: Switching On Inhibited
The communication module cannot be switched ON at
the moment.
S2: Ready For Switching On
The communication module can be switched ON at any
moment.
S3: Ready For Operation
Communication module operation is ready to be enabled.
S4: Operation enable
The motor is running.
Status transitions are directed by the commands that are periodically transmitted from

LSIS S100 Specifications

General

Brand	LSIS
Model	S100
Category	DC Drives
Language	English