LSIS XBC-DN40SU - Chapter 1 Introduction; Guide to Use this Manual

Chapter 1 Introduction
1-1
Chapter 1 Introduction
1.1 Guide to Use This Manual
This manual includes specifications, functions and handling instructions for the XGB series PLC.
This manual is divided up into chapters as follows.
No.
Title
Contents
Chapter 1
Introduction
Describes configuration of this manual, unit‟s features and
terminology.
Chapter 2
System Configurations
Describes available units and system configuration in the XGB
series.
Chapter 3
General Specifications
Describes general specifications of units used in the XGB
series.
Chapter 4
CPU Specifications
Describes performances, specifications and operations.
Chapter 5
Program Configuration and
Operation Method
Chapter 6
CPU Module Functions
Chapter 7
Input/Output Specifications
Describes operation of basic and input/output.
Chapter 8
Built-in High-speed Counter
Function
Describes built-in high-speed counter functions.
Chapter 9
Installation and Wiring
Describes installation, wiring and handling instructions for
reliability of the PLC system.
Chapter 10
Maintenance
Describes the check items and method for long-term normal
operation of the PLC system.
Chapter 11
Troubleshooting
Describes various operation errors and corrective actions.
Appendix 1
Flag List
Describes the types and contents of various flags.
Appendix 2
Dimension
Shows dimensions of the main units and expansion modules.
Appendix 3
Compatibility with
MASTER-K
Describes the compatibility with MASTER-K.
Appendix 4
Instruction List
Describes the special relay and instruction list.
www.behaotomasyon.com
www.behaotomasyon.com