Touchclave Ecotech
12
5. Pour contents of the container into a drain and remove drain hose from machine.
External Fill and drain Containers (Optional)
External fill and drain tanks are used where this is no water supply or drain available to connect the
machine to. An external container filled with water is used to supply the machine with water and an
external container is used by the machine as a drain.
Note: There external tanks are not monitored by the Ecotech control system software and so there is
no feedback from the Ecotech to the user on the fluid levels of the external containers. It is the
responsibility of the user to ensure that there is sufficient water in the external water fill container
and that the drain tank is emptied regularly to prevent this overflowing.
Connecting water fill container:
1. Insert the end of the water fill hose without a connector into the bottom of the water fill
container, ensuring that the end of the hose is at the bottom of the container.
2. Plug the end of the water fill hose push fit connector into the water fill connector at the rear
of the machine
To Next Page
Loading...
