MERLIN LEGEND Communications System Release 6.1
System Programming and Maintenance (SPM)
555-661-140
Issue 1
August 1998
Programming with SPM
Page 82
Upgrading the System
— When you upgrade from Release 3.0 to Release 5.0, you
must program the features listed in Table 10, then the
features listed in Table 11, then the features listed in Table
12, then the features listed in Table 13, then the features
listed in Table 14.
— When you upgrade from Release 2.0 or 2.1 to Release 5.0,
you must program the features listed in Table 9, then the
features listed in Table 10, then the features listed in Table
11, then the features listed in Table 12, then the features
listed in Table 13, then the features listed in Table 14.
— When you upgrade from Release 1.1 to Release 5.0, you
must program the features listed in Table 8, then the
features listed in Table 9, then the features listed in Table
10, then the features listed in Table 11, then the features
listed in Table 12, then the features listed in Table 13, then
the features listed in Table 14.
— When you upgrade from Release 1.0 to Release 5.0, you
must first program the features listed in Table 7, then you
must program the features listed in Table 8, then the
features listed in Table 9, then the features listed in Table
10, then the features listed in Table 11, then the features
listed in Table 12, then the features listed in Table 13, then
the features listed in Table 14.
■ Table 15. Lists the features added with Release 6.0 of the
communications system.
— When you upgrade from Release 5.0 to Release 6.0, you
must program the features listed in Table 15.
— When you upgrade from Release 4.2 to Release 6.0, you
must program the features listed in Table 14, then the
features listed in Table 15.
— When you upgrade from Release 4.1 to Release 6.0, you
must program the features listed in Table 13, then the
features listed in Table 14, then the features listed in Table
15.
To Next Page
Loading...
Need help?
General
