MERLIN LEGEND Communications System Release 6.1
System Programming and Maintenance (SPM)
555-661-140
Issue 1
August 1998
Programming with SPM
Page 41
Using SPM
!Assign or remove the module from the slot entered in Step 3.
To remove the module type from the specified slot number, press
(
'HOHWH
). The Boards menu reappears.
To assign the module type to the specified slot number and assign that
same module type to another slot, press
(
1H[W
).
To assign the module type to the specified slot number and assign a
different module type to another slot, press
(
(QWHU
).
To terminate the procedure and assign a different module, press
(
([LW
) and repeat Steps 2 through 4.
To view types of modules assigned to all slots, press
(
,QVSHFW
).
!
Save your entry.
Select
([LW
.
The programming session terminates and the system restarts.
Browse
The Browse option allows you to browse through reports saved in the
Reports directory (\spm\reports) on the hard disk of the PC or on a
floppy.
PRGXOHQDPH
module name
= option selected in Step 2
(QWHUVORWQXPEHUV
nn
= slot entered in Step 3
QQ
'HOHWH
%DFNVSDFH1H[W
([LW(QWHU
To Next Page
Loading...
Need help?
General
