AA (Automated Attendant) Extensions (#607)
5-5
To identify an extension where an auto attendant is installed:
1. Press
f 0 0 s s # 6 0 7 at extension
10 or 11
.
2. Enter the extension number to which the auto attendant is connected. For
example, to select extension 27, press
2 7.
3. To assign or unassign the extension, press
D
until the appropriate
value displays.
4. To assign or unassign a second auto attendant extension, press
n or
p until the extension number shows on the display. Then repeat
Step 3.
5. Select another procedure or exit programming mode.
To Next Page
Loading...
