Feature Reference
5-196
Music-on-Hold Volume (#614)
Description
This System Programming procedure allows you to select one of seven volume
settings for the external music source provided through the Music-on-Hold jack on
the PARTNER ACS processor module. This setting is system-wide.
Related Features
Music-on-Hold (#602) activates or deactivates the Music-on-Hold jack on the
processor module.
Considerations
Changes to the Music-on-Hold Volume setting will have immediate effect on all
calls currently receiving Music-on-Hold treatment.
Valid Entries
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
as
s and e on system phones.)
To change the Music-on-Hold Volume setting:
1. Press
f 0 0 s s # 6 1 4 at extension
10 or 11.
The display shows the current setting.
2. To change the setting, press the number of the setting on the dialpad, or
press
D or d until the correct setting is displayed.
3. If you want to return the volume to the default setting, press
r.
1
2
3
4
5
6
7
(lowest volume)
(highest volume)
+
+
+
+
+
+
+
✔
To Next Page
Loading...
Need help?
General
