Lucent Technologies MLS-model User Manual

Loudspeaker Paging (I70)
5-181
Loudspeaker Paging (I70)
Description
This feature accesses the loudspeaker paging system, if you have one connected
to the system through the PAGE jack on the processor module.
Related Features
■ Users can make Simultaneous Paging announcements over the
loudspeaker paging system
and the idle system phones assigned to
Calling Group 1. See Calling Group Extensions (#502) to program
Calling Group 1.
■ You can specify the loudspeaker paging system as a hotline alert extension
so that the hotline phone can be used to make announcements over the
loudspeaker. For more information, see Hotline (#603).
Considerations
■ You can program a Loudspeaker Paging button on a system phone to
access the loudspeaker with one touch.
■ If the loudspeaker paging system is in use, a user attempting to make an
announcement hears a busy tone.
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
as
s and e on system phones.)
To program a Loudspeaker Paging button:
1. Press
f 0 0 s s c at extension
10 or 11.
2. Enter the number of the extension to be programmed with this feature.
3. Press a programmable button.
4. Press left
i 7 0.
5. Program another button for this extension or exit programming mode.

Lucent Technologies MLS-model Specifications

General

Brand	Lucent Technologies
Model	MLS-model
Category	Telephone
Language	English