EasyManuals Logo

Lucent Technologies MLS-model User Manual

Lucent Technologies MLS-model
484 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #149 background imageLoading...
Page #149 background image
Background Music (F19)
5-39
Background Music (F19)
Description
This feature is available only on system phones with speakers.
This feature provides background music through the speaker of an idle system
phone for a user’s work area. Background Music plays the recorded material from
the Music-on-Hold audio source.
Related Features
Background Music is available only if Music-on-Hold (#602) is active and an
audio source is connected to the processor module.
Considerations
â–  The Background Music feature broadcasts music over telephone lines. The
performance of music over telephone lines is a public performance under
United States Copyright law. Accordingly, in order for the performance of
that music to be lawful, it must be licensed annually to the user by the
copyright owners or their representatives (such as ASCAP or BMI).
The Magic on Hold system includes the required license for the first year.
This license must be renewed annually.
â–  Background Music stops when a user makes or answers a call, but
resumes when the phone becomes idle again.
â–  If a system phone and a standard phone with a message waiting light are
connected in a combination extension, the standard phone’s message
waiting light will not light if Background Music is on at the system phone.
â–  You can program a Background Music button on a system phone to use the
feature with one touch. A button with lights is recommended.
â–  Call Screening (F25) overrides Background Music.
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
as
s and e on system phones.)
To program a Background Music button:
1. Press
f 0 0 s s c at
extension 10 or 11.
2. Enter the number of the extension to be programmed with this feature.
3. Press a programmable button, preferably a button with lights.
4. Press
f1 9.
5. Program another button for this extension or exit programming mode.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lucent Technologies MLS-model and is the answer not in the manual?

Lucent Technologies MLS-model Specifications

General IconGeneral
BrandLucent Technologies
ModelMLS-model
CategoryTelephone
LanguageEnglish

Related product manuals