Lucent Technologies MLS-model User Manual

Feature Reference
5-4
AA (Automated Attendant) Extensions (#607)
Description
This System Programming procedure lets you identify extensions where auto
attendants are connected to the system. Doing so lets the system notify users
with display phones when they are receiving a call that has been transferred from
the auto attendant. (This procedure applies only to auto attendants—do not use it
with the Automated Attendant Service of a voice messaging system.)
Related Features
■ For each auto attendant extension, use Transfer Return Extension (#306)
to identify the extension to which a call should be routed if the destination
extension does not answer.
■ Set Automatic Extension Privacy (#304) to Not Assigned for the auto
attendant extension if you want to be able to intercept calls routed to the
device.
Considerations
■ Chapter 4 provides information about using auto attendants with the
system.
■ On system display phones, Automated Attendant displays when a call is
being transferred from an auto attendant. Transfer from AA or Transfer from
Auto Att displays when a call transferred by an auto attendant was not
answered and is being returned to your extension.
Valid Entries
1 = Assigned
2 = Not Assigned
✔
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
as
s and e on system phones.)

Lucent Technologies MLS-model Specifications

General

Brand	Lucent Technologies
Model	MLS-model
Category	Telephone
Language	English