Doorphone Extension (#604 and #605)
5-125
Valid Entries
Any extensions except 10, 11, or the first two extensions of any 206 or 308EC
modules.
None Assigned
✔
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
as
s and e on system phones.)
To program a doorphone extension:
1. Press
f 0 0 s s # 6 0 4 for
doorphone 1 (or
# 6 0 5 for doorphone 2) at extension 10 or 11
.
2. Enter the doorphone extension number. For example, to identify extension
20 as a doorphone extension, press
2 0—or press r to unassign
an existing doorphone extension.
3. Select another procedure or exit programming mode.
To Next Page
Loading...
Need help?
General
