Night Service Group Extensions (#504)
5-201
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
as
s and e on system phones.)
1. Press
f 0 0 s s # 5 0 4 at extension
10 or 11.
2. Enter the number of the extension to be programmed. For example, to
program extension 13, press
1 3.
3. To assign or unassign the extension, press
D until the appropriate
value displays.
4. To assign or unassign another extension, press
n or p until
the extension number shows on the display. Repeat Step 3.
5. Select another procedure or exit programming mode.
To Next Page
Loading...
Need help?
General
