Privacy (F07)
5-223
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
as
s and e on system phones.)
To program a Privacy button:
1. Press
f 0 0 s s c at extension
10 or 11.
2. Dial the number of the extension to be programmed with this feature.
3. Press a programmable button with lights.
4. Press
f 0 7.
5. Program another button for this extension or exit programming mode.
Using
From a system phone, press the programmed button to turn Privacy on; press it
again to turn it off.
Use the button like a switch—when the light is on, Privacy is
on.
To Next Page
Loading...
Need help?
General
