Feature Reference
5-254
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
as
s and e on system phones.)
To change the Star Code Dial Delay setting:
1. Press
f 0 0 s s # 4 1 0 at extension
10 or 11.
The current setting is displayed.
2. Press the number on the dialpad for the setting you want (see “Valid
Entries,” above), or press
D or d until the correct setting is
displayed.
3. To return to the default setting, press
r.
4. Select another procedure or exit programming mode.
To Next Page
Loading...
