LUMENIS UltraPulse - Page 72

UltraPulse
0637-129-01, Revision G
72  Enabling application- specific settings
Setting the Scan Depth
Press the and buttons on the scan depth selector. The selected depth
displays on the control screen. The scan depth represents the number of times
that the selected pattern is scanned.
SurgiTouch+; Setting the Scan Depth
W
10 W!
30 W
0.00 s
10 ms
1 2.0 mm
2
ENT Larynx AcuBlade
400mm
I
I
SurgiTouch + UltraPulse CW Options
2
Decrease
scan depth
Increase scan
depth
Selected depth