Lumens CL510 User Manual

English - 8
Chapter 4 Start Using
1. Place an object to be displayed under the camera.
2. Press [POWER] on the
Remote Control
to power on.
3. Press [AUTO TUNE] button on the
Remote Control
to optimize the
image
.
You are ready to teach/present.
 When using the Remote Control, aim at the remote sensor on the
CL510, and press the power button.
 When the power is on, the LED indicator will light red. If the indicator
does not light up, please contact your distributor.

Lumens CL510 Specifications

General

Brand	Lumens
Model	CL510
Category	Document Camera
Language	English