7.6.2 Manual Tracking
1. Press [MENU] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to the [Display] menu.
3. Press [] to the [Focus].
4. Press [] or [] to adjust focal length.
5. Press [MENU] to exit.
7.7 I would like to adjust the brightness
1. Use Remote Control or Control Panel and press [BRT+] to make it
brighter.
2. Use Remote Control or Control Panel and press [BRT-] to make it
darker.
7.8 I would like to turn on/off the lamp
The default of the lamp is ON. When using the control panel:
1. Press [LAMP] to switch ON/OFF. (in the sequence of arm
lamp/backlight/OFF)
7.9 I would like to freeze images
1. Press [FREEZE] on the remote control or control panel to freeze the
current image on the screen.
7.10 I would like to adjust the volume
<Note> Volume control is intended to control the external audio output
equipment only.
7.10.1 Adjust Volume (OSD)
1. Press [MENU] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to the [Setting] menu.
3. Press [] to the [Volume].
4. Press [] or [] to adjust the volume.
5. Press [MENU] to exit.
To Next Page
Loading...
