46
6.2.9 Setting - Network
No Item Function Descriptions
1 Network
Network setting of camera. Change of setting is available when DHCP
function is closed.
2 RTMP Setting
Copy the RTMP web address provided by the RTMP service platform and
paste it to the RTMP connection address to publish the camera images
on the RTMP service platform
To upload to YouTube for live streaming, the audio function must be
turned on first
3 RTSP Setting
Enable/Disable Multicast. It is suggested to enable Multicast when the
number of users online watching the live image simultaneously is more
than 4
4 MPEG-TS Setting
Set MPEG-TS format
<Remark> The following port has been used by the camera. Setting of
the port may not connect correctly
8554, 8556, 8557, 8080, 80, 81, 9090, 23
5 SRT Setting
1. Set the field of SRT and then check the item to open SRT streaming
After the SRT streaming is opened, it will be connected automatically
upon startup
2. The port number must be set in the range above 1024 with a maximum
value of 9999
The following port has been used by the camera. Setting of the port
1
2
3
4
5
7
6
To Next Page
Loading...
Need help?
General
