English - 8
4.3 Preparation before installation
Installation and connection of HD camera requires special skills. To install by yourself,
please follow necessary steps, ensure steady and tight installation of the device, and pay
attention to your safety to avoid any accident.
4.3.1 Ensure the safety of the installation environment. Please do not install the device on unstable
ceiling or in a place where the device is in danger of falling to avoid any accident.
4.3.2 Please check whether accessories in the box are complete or not. Please contact the supplier
for any shortage, and make sure to keep the accessories in the box intact.
4.3.3 Please choose a proper place for installation of camera in advance. Please determine an
installation place according to the following requirements
4.3.3.1 Confirm the position for the object to be captured.
4.3.3.2 Confirm whether the camera is set at a proper distance from other light sources.
4.4 Instruction for installation
4.4.1 Precautions for installation
VC-TR1 does not support upside-down installation
Do not grab the camera head by hand when handling the device
Do not rotate the camera head by hand. Improper rotation may result in breakdown of the
camera
4.4.1.1 Install the camera on the desk
Please place the camera on a flat desktop to ensure the the normal vertical and
horizontal operation of the machine and the good cooling of the fan at the bottom
4.4.1.2 Install the camera on a tripod deck
To Next Page
Loading...
Need help?
General
