• Unlock the node
When the node is password protected through the Web interface, it will
automatically lock the access to the Web interface. To unlock the node,
enter the password in the password field (login = admin).
• Reset the node (Out of jail)
This useful function makes it possible to bring the node in a factory
default.
1. Press and hold the jog on the front panel
2. Power up the device
3. wait until the converter to display the reset confirmation
4. confirm
5. The unit is now rebooting to its default settings
Ethernet - DMX8 MkII Range Page 13 of 35
To Next Page
Loading...
Need help?
General