Network settings
IP Settings
You can enter here the desired Art-Net™ IP address and Netmask you
want to use. If you're not confident with Art-Net™ IP setting, tick the “Art-
Net™ compliant?” box for the node to warn you in case of mistake. Art-
Net™ IP addresses usually looks like 2.x.x.x or 10.x.x.x.
You're not obliged to work with Art-Net™ IP addresses. If you wish to
work with usual IT IP addresses as 192.168.x.x, there's no problem for
you to set such address on the node. Please remember that your node will
thus not be visible on the network from devices set with conventional Art-
Net™ IP addresses (2.x.x.x or 10.x.x.x).
The Port field allows you to change the UDP port used on the network to
transmit your UDP Art-Net™ packets. Luminex recommend no to change
this value.
Node identification :
Enter here a small and long name to easily identify your node on the
network through a Web interface, Art-Net™ compliant softwares or
Luminex LumiNet monitor.
Page 26 of 35 Ethernet - DMX8 MkII Range
To Next Page
Loading...
Need help?
General