Miscellaneous
This part is about security and warnings :
– Verbose level : Select if you want to see error and warning messages
on the front end LCD or through the Web interface.
– Lock Mode: select the security level you want to be applied on your
Ethernet-DMX8 MkII front end. Auto lock will force the Node to lock the
jog after 2 minutes of front end inactivity.
Password protected mode will guide you to set a password into the
“locking code” field. Once the node is locked, you'll have to enter the 4
digit password through the Web interface password field. Use “admin”
in the login field.
Page 28 of 35 Ethernet - DMX8 MkII Range
To Next Page
Loading...
Need help?
General