loosen particles. IMPORTANT: If you use a wire brush, always
move the brush in the direction of the grains in the PlasDECK.
• Sanding! For bad scuffs, small cigarette burns, or really
stubborn stains that have been left to dry, lightly sand the
area with 40 grit sandpaper. Also, if an area is worn smooth
for some reason, the texture can be restored by lightly
sanding. Make sure you sand in the direction of the grain with
short strokes. Use a heat gun or let the sun heat your deck
over time to blend tones on any areas that have been
lightened during the sanding process. Don’t use a power
sander on your PlasDECK! It will warp the ‘grain’ that lends to
PlasDECK’s teak appearance.
• Patch it! A patch can be used to repair any serious damage to
the deck. Contact PlasDECK for more information on patching
by visiting our website at www.PlasDECK.us or by calling us
directly at 1-800-320-1841.
• DON’T bother wearing black-soled shoes on PlasDECK. Black
shoes may leave scuffs on any decking surface. Wear boat
shoes or no shoes. With PlasDECK’s non-skid surface you
won’t have to worry about the surface being slippery when
wet.
• DON’T put oil, varnish, paint, sealers or lacquers on your
PlasDECK! Isn’t that why you chose PlasDECK instead of teak?
The PlasDECK doesn’t need protectants and doesn’t require
this maintenance.
• OUCH! As with any deck, including teak, don’t place hot
metals or other hot objects on PlasDECK.
You will find that with a minimum effort your deck will retain its
classic look for many years to come.
SPOTS AND STAINS
Spots and stains should be treated immediately. The
longer a spot remains untreated, the more difficult it will be
to remove. Blot up spills with clean, white absorbent
materials. Remove solid built-up materials with a rounded
tablespoon, a spatula or the edge of a dull knife.
Use small amounts of the cleaning agents and blot
frequently. Always blot, do not rub or brush. Work from the
outer edge of the spot towards the center to prevent rings.
https://www.boat-manuals.com/lund/
To Next Page
Loading...