EasyManua.ls Logo

Lund WT200 - Fresh Water Supply; Porta-Potti

Lund WT200
178 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SYSTEMS AND COMPONENTS
14
If you prefer you can use the livewell as a cooler. Simply
remove the standpipe and insert the plug provided for this
purpose.
Do not operate the livewell pump dry. The pump is water-
cooled and becomes overheated if no water is flowing
through the pump. If water does not come out of the
discharge sprayer nozzle, stop the pump and correct the
problem (for example, blown fuse, broken wires, closed
flow control valve, plugged inlet). If the problem persists,
check with your dealer.
If the overflow or drain becomes plugged, try back-flushing
it with a garden hose set at low velocity. Some models
have a screen at the pump intake. Remove the screen
before back-flushing. Often the obstruction will blow back
into the livewell where it can be easily removed. Be careful
that you do not use too much pressure. You can blow the
hoses off the fittings.
FRESH WATER SUPPLY
A fresh water system is standard equipment on some
models and optional on others. The manually pressurized
fresh water system provides fresh water from a tank to the
galley sink. Fill the tank only with fresh water. Refilling the
tank often will help keep it a source of fresh and clean
drinking water.
PORTA-POTTI
®
A self-contained porta-potti is available as optional
equipment on some models. This portable toilet provides
simple operation and convenient disposal of waste. The
waste is transported off the boat by removing the holding
tank. Dispose of the waste properly at a dump station or
other appropriate location. Do not dump the tank’s
contents overboard.
The unit is usually stored either in the privacy area under
the sun lounge or in the changing room. Special mounting
https://www.boat-manuals.com/lund/

Table of Contents

Related product manuals