10. Test operation of navigational lights and other lighting
inboard. Repair or replace as necessary.
11. Reinstall hull drain plug after coating threads with teflon
tape or petroleum jelly.
12. After launching, check all sources of possible leaks
from bow to stern. Make this check before leaving the
dock!
13. Check all steering controls, cables and linkage for free
operation.
14. Test run engine as directed in the equipment manuals.
15. Check that the bilge area is clean. Check operation of
bilge pump.
16. Check that water intake for livewell pump is clear.
https://www.boat-manuals.com/lund/
To Next Page
Loading...