INTRODUCTION
1. Signing off on the boat inspection sheet before
delivery.
2. Warranty Register the boat with the Lund Factory
3. Keep a record of the hull number for future
reference.
4. Inspecting the boat at the time of delivery to
ensure that all systems and components are
working properly.
5. Reviewing the pre-delivery engine service record
with your dealer. Signing this record to indicate
that your dealer has explained this to you.
6. Operating all equipment in accordance with the
manufacturer’s instructions. Reading all manuals
and instructions supplied with your boat.
7. Referring to your engine warranty for initial
inspection and service requirements.
8. Performing or providing for the appropriate
periodic maintenance outlined in the owner’s
manuals and service guides.
9. Scheduling your boat’s 20-hour check-up with your
dealer.
NOTE: Lund advises that all rigging, installation, and prep
work on any model be done by an Authorized Dealer at the
Authorized Dealer’s location.
https://www.boat-manuals.com/lund/
To Next Page
Loading...