SYSTEMS AND COMPONENTS
On one side of the pontoon, start installing one of the side
curtains by attaching it to the canvas top with the matching
zippers. Install the next curtain the same way and zip the
two curtains together. Make sure your pontoon’s side gate
matches up to the door of the side curtain. Repeat this
process on the other side of the boat.
Locate the bow curtain and zip it onto the canvas top at the
front. Zip the side curtains to the bow curtain on each side.
Locate the aft curtain and zip it onto the canvas top at the
rear. Zip the side curtains to the aft curtain on each side.
Make sure the tops’ flaps overlap the zippers where the
curtains join the top. All of the curtains should be hanging
loose over the pontoon fence. Go around the entire
pontoon to make sure all of the curtains are hanging the
same length on both sides. If they are not even you may
have to remove them and re-center the canvas tops.
Now go around the outside of your pontoon fence and
attach the bottom edge of the enclosure curtains to the
fence using the installed snaps or clips (if your boat has
clips).
The windows on the curtains may be unzipped to expose
the screens and allow air circulation while in use. Simply
unzip the window, roll it down and fasten the web strap
around it. The side gate doors unzip to allow access or can
be folded back or completely removed.
https://www.boat-manuals.com/lund/
To Next Page
Loading...