EasyManuals Logo

LX Navigation lx 7000 User Manual

Default Icon
45 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
LX7000 Mar.2002
Page 10
The following data is stored under FLIGHT INFO:
Observer input is not necessary.
LOGTIME is an important setting for sufficient flight recording.
TOTAL MEMORY is the capacity of memory and depends on settings only. This number is not reduced after
some flights are stored. It changes only after new settings have been made in setup. The total memory indicates
how many hours of flight can be flown without loosing the flight data because of overwriting.
B-RECORD: position, GPS altitude, pressure altitude, UTC and GPS status are recorded
Pilot sets record interval, the default value is 12 seconds.
K-RECORD: not active now
NEAR TP INT.: being close to the turnpoint (inside NEAR RAD) the logging runs faster
NEAR TP RAD.: radius that defines NEAR
(I) and (J) (RECORDs are not active)
EVENT
After pressing EVENT key, the logger will run a limited time faster like defined in LOGTIME. Activation of
EVENT is recorded like a special record in the IGC file. Some competition rules require using EVENT before
departure.
Example: after EVENT, 30 additional fixes will be logged in 2-second interval.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LX Navigation lx 7000 and is the answer not in the manual?

LX Navigation lx 7000 Specifications

General IconGeneral
BrandLX Navigation
Modellx 7000
CategoryCar Navigation system
LanguageEnglish