40
Non-Continuous Tests Button Definitions
Menu Button
Tapping the Menu button displays a pop-up link
that takes the user to more buttons.
View Help
Selecting View Help will open an online opera-
tors manual.
Use Metric Units
Selecting Metric Units will switch from English/
Standard Units to Metric Units
Use English/Standard Units
Selecting English/Standard Units will switch
from Metric Units to English/Standard Units.
Take Screen Capture
Selecting Take Screen Capture will save a copy
of the current open screen.
Special Tests
Mode 8 controls the operation of an onboard system, test, or component which is typically the EVAP system or
diesel particulate filter (DPF) test.
Generic OBDII
READINESS MODE 1
Vehicle Informationation (Mode 9)
TAP ‘SPECIAL TESTS MODE 8’ TO REOPEN
DATA STREAM MODE 1
FREEZE FRAME MODE 2
DTC’s MODES 3,4,7,A
O2 SENSORS MODE 5
NON-CONTINUOUS TESTS
MODE 6
SPECIAL TESTS MODE 8
VEHICLE INFO MODE 9
Generic OBDII
Current
ss02428
1. Select Special Tests from the Generic OBDII screen.
To Next Page
Loading...