35
DTCs Modes
Modes 3, 4, 7, and A read and clear DTCs.
Generic OBDII
READINESS MODE 1
DATA STREAM MODE 1
FREEZE FRAME MODE 2
DTC’s MODES 3,4,7,A
O2 SENSORS MODE 5
TAP ‘DTCs MODES 3, 4, 7, A’ TO REOPEN
NON-CONTINUOUS TESTS
MODE 6
SPECIAL TESTS MODE 8
VEHICLE INFO MODE 9
Generic OBDII
Current
ss02423
1. Select DTCs Modes from the Generic OBDII screen
Diagnostic Trouble Codes
for Global OBDII
B0001
Driver Frontal Stage 1
Deployment Control (Subfault)
Generic OBDII
Current
B0001
Driver Frontal Stage 1
Deployment Control (Subfault)
B0002
Driver Frontal Stage 2
Deployment Control (Subfault)
B0002
Driver Frontal Stage 2
Deployment Control (Subfault)
B0001
Driver Frontal Stage 1
Deployment Control (Subfault)
B0002
Driver Frontal Stage 2
Deployment Control (Subfault)
B0003
Driver Frontal Stage 3
Deployment Control (Subfault)
B0003
Driver Frontal Stage 3
Deployment Control (Subfault)
OBDII PENDING CODES
OBDII PENDING CODESOBDII CURRENT CODESOBDII CURRENT CODESOBDII CURRENT CODES OBDII PENDING CODES
OBDII PERMANENT CODES OBDII PERMANENT CODES OBDII PERMANENT CODES
B0003
Driver Frontal Stage 3
Deployment Control (Subfault)
CHECK
ss02424
2. Use the buttons and follow the prompts on the screen.
To Next Page
Loading...