215505 9 Revision A
Chapter 3: Steel Finger Placement
Refer to the following illustrations during the installation process to make sure the fingers are placed in the correct
locations for your application:
• 3.1 FD230, Double Reel, Five and Six Bats – Narrow, page 10
• 3.2 FD230, Double Reel, Five and Six Bats – Wide, page 11
• 3.3 FD235, Double Reel, Five and Six Bats – Narrow, page 12
• 3.4 FD235, Double Reel, Five and Six Bats – Wide, page 13
To Next Page
Loading...
