215505 33 Revision A
5.2 Installing Reel Endshields
There are four kinds of endshields. Ensure you are reinstalling the endshields in the correct locations as shown below:
NOTE:
The arrow points to the front of the machine.
$
%
&
'
Figure 5.23: Reel Endshields
A - Tail End, Outboard (MD #311695) B - Cam End, Inboard (MD #273823)
C - Tail End, Inboard (MD #311795) D - Cam End, Outboard (MD #311694)
INSTALLATION INSTRUCTIONS
To Next Page
Loading...
