Need help?Do you have a question about the MacDon FlexDraper FD235 and is the answer not in the manual?
General| Model | FD235 |
|---|---|
| Header Type | FlexDraper |
| Header Drive | Hydraulic |
| Compatibility | Case IH, John Deere, New Holland |
| Reel Speed | Variable |
| Cutting Width | 35 ft (10.7 m) |
Provides an estimated duration for the installation process.
Explains terminology, symbols, and directional references used throughout the manual.
Clarifies the meaning of DANGER, WARNING, CAUTION, IMPORTANT, and NOTE for hazard communication.
Outlines essential safety practices for operating and servicing agricultural machinery.
Lists all components included in the Steel Finger Kit MD #311054 for FD230, Five Bats.
Lists all components included in the Steel Finger Kit MD #311055 for FD230, Six Bats.
Lists all components included in the Steel Finger Kit MD #311068 for FD235, Five Bats.
Lists all components included in the Steel Finger Kit MD #311069 for FD235, Six Bats.
Illustrates correct placement of steel fingers for FD230, Double Reel, Five/Six Bats - Narrow.
Illustrates correct placement of steel fingers for FD230, Double Reel, Five/Six Bats - Wide.
Illustrates correct placement of steel fingers for FD235, Double Reel, Five/Six Bats - Narrow.
Illustrates correct placement of steel fingers for FD235, Double Reel, Five/Six Bats - Wide.
Detailed procedure for removing existing steel or plastic fingers and bushings from reel tubes.
Step-by-step instructions for installing new bushings and steel fingers onto the reel.
Guidance on correctly reinstalling the reel endshields at specified locations.
To Next Page