250 Hour Service Interval
Draper Clinic Handout
8
Grease auger pivots (A), right side wheel
axle (B), left side wheel pivot (C), and
frame wheel pivot (D). Note: Axle (B) is not
greasable on 2017 and newer transports.
Grease upper cross auger U-joint bearings (A &
B below)
Find your operators manual at: www.macdon.com/support/operators-manuals
FD75 Only
• Grease wing flex linkages (C) every 250
hours (4 places)
Grease Reel U-Joint (A)
- CA20 uses
filter part
#151975
- CA25 with
Bosch block
uses part
#123989
- CA25 with
Parker block
uses part
#151975
Change hydraulic oil filter (B) after first 50 hours
and every 250 hours thereafter.
Please Refer to Maintenance and Servicing Section of Operators Manual for Model Specific Maintenance
- Double reel only
Greaseless on 2017 & Newer
To Next Page
Loading...
