2. After installation, activate your software. Click on ”Licence
” button, then write
in your 8 character long code given by your distributor. (In case you bought
only the software, you will receive it in an e-mail, otherwise the code is found
in the product box.)
3. After entering the code, the ”Licence
” button on the main window will change
to ”Start
” button and you will be able to use the software without any
restrictions.
Software updates are available on this link: machineryguideapp.com/en/releases.
Installing a software update is very similar to the installation of the original software,
the main difference is that Activation is not required this time.
In case of a new release, each user will be notified via e-mail. (The e-mail will be sent
to the e-mail address that was assigned to the registration).
To Next Page
Loading...