The Application send notifications in case of any error that occurs while using the
Bluetooth GPS-receiver.With these notifications the User can solve issues in
connection with the guidance system quickly. If the accuracy of the received position
data decreases below the minimum level, a notification shows up, so the User can
stop the job until the signal becomes accurate enough to continue with the desired
accuracy. The Application also gives notifications if the connection with the antenna is
lost or not stable.
Sources of error messages:
1. Bluetooth connection had been cut-off (possible cause: the power supply of
the Bluetooth-receiver is unavailable, that is, the USB-cable or the car
charger is unplugged)
2. There has been no new information about the position within a certain
amount of time.
To Next Page
Loading...