MacroAir Technologies AirVolution 550 - User Manual

© 2015 MacroAir Technologies Toll Free: 866 668 3247 Fax: 909 890 2313 www.macroairfans.com 1
Rev. Date 090415

MacroAir Technologies AirVolution 550 Specifications

General

Brand	MacroAir Technologies
Model	AirVolution 550
Category	Fan
Language	English

Summary

Caution & Safety

Key Safety System Components

Details on safety cables, guy wires, and airfoil links for fan safety and structural integrity.

Mark the Floor to Alert Personnel

Advises marking the floor to alert personnel to the overhead fan location.

Weight Considerations

Guidance on building load capacity, recommending twice the fan's hanging weight for safety.

Torque

Details the maximum torque (twisting force) that the mounting system must handle.

Check Federal, State, and Local Codes

Highlights the importance of verifying compliance with all relevant federal, state, and local building codes.

Windy Conditions

States fans should not be operated or installed in windy conditions.

Fusing Chart

Fan Placement

Sprinkler Systems and Fan Placement

Guidelines for fan placement near fire sprinklers, ensuring no interference and adherence to codes.

Other Information on Placement and Spacing

Advice on fan positioning to avoid strobe effects and maintain safe clearance from personnel.

Fan Clearance - Rapid Mount Industrial

Fan Clearance - Universal Mount

Fan Dimensions

Fan Components

Step 1 A - Rapid Mount Industrial Installation

Rapid Mount Industrial

Description of the Rapid Mount Industrial, its components, and mounting hardware.

Unistrut Span Mounting

Step-by-step guide for installing the fan mount using Unistrut span mounting.

I-Beam Mounting

Procedure for securely mounting the fan to an I-beam structure.

Glulam;Wood Beam Mounting

Instructions for attaching the fan mount to Glulam or wood beams.

Step 1 B - Universal Mount Installation

Universal Mount

Overview of the Universal Mount, its parts, and general specifications.

Unistrut Span Mounting

Guide for installing the Universal Mount using Unistrut span mounting methods.

I-Beam Mounting

Procedure for attaching the Universal Mount to an I-beam.

Glulam;Wood Beam Mounting

Steps for securing the Universal Mount to Glulam or wood beam structures.

Step 2 A - Drop Length and Motor Unit Installation for Rapid Mount Industrial

Drop Length and Motor Unit Installation

Instructions for attaching the drop length and motor unit to the mount.

Step 2 B - Drop Length and Motor Unit Installation for Universal Mount

Drop Length and Motor Unit Installation

Procedure for connecting the drop length adapter, drop length, and motor unit.

Step 3 - Safety Cable and Electrical Installation

Safety Cable & Electrical Installation

Details on installing safety cables and connecting electrical components to the motor unit.

Analog Control Wiring Schematic

Wiring diagram for connecting the analog remote control system.

Touchpad Remote Mounting

Guidance on mounting the touchpad remote control, including wall and flush mounting.

Safety Cable & Electrical Installation

Instructions for running remote and safety cables and connecting to power.

Fuse Disconnect Switch Installation

Steps for installing the optional fuse disconnect switch for power control.

Emergency Disconnect Schematic

Schematic for wiring the fan to an emergency stop system, like a fire alarm.

Step 4 - Guy Wire Installation

Guy Wire Installation

Procedure for attaching and tensioning guy wires for fan stability.

Guy Wire Cord Installation

Instructions on installing the redundant safety cord for the guy wire turnbuckles.

Step 5 - Airfoil Installation

Airfoil Installation

Steps for attaching airfoils and safety retainer links to the airfoil struts.

Step 6 - Touchpad Remote Navigation and Operation

Touchpad Remote Navigation

Description of buttons and their functions on the touchpad remote control.

Touchpad Remote Operation

Instructions for operating the fan using the touchpad remote, including setup and fault codes.

Maintenance Information

Guy Wire Check (if applicable)

Guidance for inspecting guy wires for tension, fraying, and proper attachment.

Airfoil Cleaning

Recommendations for cleaning fan airfoils using appropriate methods and solutions.

Safety Cable Check

Emphasis on checking the safety cable's condition and security as a critical safety feature.

Reverse Operation

Precautions for switching fan direction, ensuring all safety components are tight.

Maintenance Plan

A plan detailing inspection frequencies for fan components over its lifespan.

Troubleshooting

Warranty and Technical Support

What does the 50,000 hour warranty cover?

Details the parts and components covered by the 50,000-hour warranty.

How Long Does the Coverage Last?

Specifies that the warranty covers the entire fan for 50,000 hours of running time.

Do I Need to Pay Shipping, Removal and Re-Installation Costs?

Clarifies reimbursement for shipping, removal, and re-installation costs under warranty.

What is NOT covered under this warranty?

Lists exclusions from warranty coverage, such as improper installation or operation.

Technical Support

Provides contact information for installation assistance and technical support inquiries.