MACROMEDIA DIRECTOR MX-USING DIRECTOR MX - Page 310

Chapter 11310
The steps required to communicate with Flash Communication Server MX are identical to those
you would use in ActionScript.
To create a NetConnection object:
• Use the Lingo newObject() command.
myNetConObject = sprite(1).newObject("NetConnection")
To create a NetStream object:
• Use the newObject() command and include the NetConnection object as a parameter:
myStream = sprite(1).newObject("NetStream", myNetConObject)
The NetStream object can send text messages without the need for a Flash sprite on the Stage.
To create a global NetConnection object that does not require a sprite reference:
• Use the Lingo newObject() command and omit the sprite reference.
myNetConObject = newObject("NetConnection")
To create a global NetStream object that does not require a sprite reference:
• Use the newObject() command and include the NetConnection object as a parameter, and
omit the sprite reference:
myStream = newObject("NetStream", myNetConObject)
To send text messages with the NetStream object:
• Use the send command.
myStream.send(handlerName {,p1, ...,pN})
To send audio or video, you need to associate a camera and microphone with the
NetStream object.
To associate a video camera with the NetStream object:
• Use the ActionScript attachVideo command.
myStream.attachVideo(source)
To associate a microphone with the NetStream object:
• Use the ActionScript attachAudio command.
myStream.attachAudio(source)
To publish a video, audio, or other data stream with the NetStream object:
• Use the ActionScript publish command.
mystream.publish(whatToPublish)
To play a non-video data stream from the server with the NetStream object:
• Use the ActionScript play command
mystream.play(whatToPlay)