Writing Scripts with Lingo 411
For example, the following case statement tests which key the user pressed most recently and
responds accordingly:
case (the key) of
"A": go to frame "Apple"
"B", "C":
puppetTransition 99
go to frame "Oranges"
otherwise beep
end case
• If the user pressed A, the movie goes to the frame labeled Apple.
• If the user pressed B or C, the movie performs the specified transition and then goes to the
frame labeled Oranges.
• If the user pressed any other letter key, the computer beeps.
A case statement can use comparisons as the test condition.
For more information, see
case in the Lingo Dictionary.
Repeating an action
Lingo can repeat an action a specified number of times or while a specific condition exists.
To repeat an action a specified number of times:
• Use a repeat with structure. Specify the number of times to repeat as a range following
repeat with.
This structure is useful for performing the same operation on a series of objects. For example, the
following repeat loop makes Background Transparent the ink for sprites 2 through 10:
repeat with n = 2 to 10
set the ink of sprite n = 36
end repeat
This example performs exactly the same action as above, but uses dot syntax:
repeat with n = 2 to 10
sprite(n).ink = 36
end repeat
This example performs a similar action, but with decreasing numbers:
repeat with n = 10 down to 2
sprite(n).ink = 36
end repeat
To repeat a set of instructions as long as a specific condition exists:
• Use a repeat...while statement.
For example, these statements instruct a movie to beep continuously whenever the mouse button
is being pressed:
repeat while the mouseDown
beep
end repeat
To Next Page