MACROMEDIA DIRECTOR MX-USING DIRECTOR MX - Page 490

Chapter 19490
textureMode
List[index]
Get and set This property allows access to the texture
coordinate generation function used for a
texture at the texture level and then to allows
you to change how textures are applied to a
model’s surface. The property can take the
following values:
#none
#wrapPlanar
#wrapCylindrical
#wrapSpherical
#reflection
#diffuseLight
#specularLight
#none
textureMode
List
Get and set Get: Returns a list of texture coordinate
generation functions, one per layer.
Set: Specifies texture coordinate generation
modes to be applied to all layers.
Possible values are as follows:
#none
#wrapPlanar
#wrapCylindrical
#wrapSpherical
#reflection
#diffuseLight
#specularLight
#none
textureMode
Get and set Access to the texture coordinate generation
function for the first layer.
Possible values are as follows:
#none
#wrapPlanar
#wrapCylindrical
#wrapSpherical
#reflection
#diffuseLight
#specularLight
#none
wrapTransform
List[index]
Get and set Access to the texture coordinate generation
transform associated with a specified layer.
This transformation has effect only if the
textureModeList[index] is
#wrapPlanar, #wrapSpherical, or
#wrapCylindrical.
Controls the orientation of texture coordinate
generation in model-relative space.
Use this property to change the orientation,
offset, and scale of how the
wrapTransformList[index] is applied
on the model.
transform(50
.0000,0.0000
,0.0000,0.00
00,
0.0000,50.00
00,0.0000,0.
0000,
0.0000,0.000
0,50.0000,0.
0000,
0.0000,0.000
0,0.0000,1.0
000)
Property Name Access Description Default