Risk of injury from missing safety devices
These devices are necessary for the safe operation of the machine. They must
not be removed or rendered ineffective.
➢ Check the proper functioning of the safety devices before you start
operating the machine.
➢ Never use the machine with missing or ineffective safety devices.
The machine is equipped with the following safety devices:
Switch interlock during tool change
Functional check (actuate rotary button)
Contact protection for drill bit
Large contact surfaces of base plate and swiveling
guide fence
Visual check for damage and deformation
Switching device and brake
Functional check (braking time must not be longer
than 5 seconds)
Visual check for damage and obstruction
If the safety devices are damaged or not functioning properly, follow the instructions in the chapter
Troubleshooting. For other malfunctions, please contact your dealer or MAFELL Customer Service directly.
To Next Page
Loading...
