Mafell DDF40 - Operation; Machine Startup Procedure; Switching Machine On and Off

DDF40
01/2022
19
5 Operation
5.1 Startup
These operating instructions must be brought to the attention of all persons entrusted with the operation of the
machine, with particular emphasis on the chapter "Safety instructions".
5.2 Switching on / off
Use the following procedure to switch on the
machine:
1. Press down the power switch (4) until it
engages.
✓ The machine is switched on.
Use the following procedure to switch off the
machine:
1. Press the power switch (4).
➢ The power switch jumps to the OFF
position.
✓ The machine is switched off.
Fig. 14: Switching the machine ON/OFF
The power switch is blocked in the tool change position ( )!
Check the setting of the rotary button (6).